Black speedometer cable, one end with swivel nut and opposite end for screwing with additional plastic cap, in original length, suitable for your Piaggio Bravo moped / moped.
With a length of 635 mm, the speedometer cable is designed for the original handlebar or lamp height. If you use a lower handlebar on your Piaggio Ciao, Si or Boxer, you can of course also fit it to these models. The speedo cable is compatible with both original Veglia speedo snails and the GPO speedo drive.
You can find a suitable speedometer in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Color | black |
| Thread type | MF11x0.75 (fine pitch thread) |
| 4-edge speedometer cable | 2.6 mm |
| Outer shell length | 635 mm |
| Total length | 670 mm |
| Piaggio | Bravo / Super Bravo |
Ratings
Accessories & related products
Speedometer 80 km/h Ø 48 mm Veglia replica | Piaggio Ciao, SI, Bravo, Boxer
Surface: chrome-plated · Thread type: MF11x0.75 (fine pitch thread) · Color: Chrome · Color: red · Color: white · Maximum speed: 80 Km/h · Signal type Tacho: analog · 4-edge speedometer cable: 2.6 mm · Ø Receptacle: 48 mm · Depth: 50 mm
EUR 74.20
Speedometer 60 km/h Ø 48 mm Veglia replica without bracket | Piaggio Ciao, SI, Bravo, Boxer
Color: Chrome · Color: white · Maximum speed: 60 Km/h · Signal type Tacho: analog · 4-edge speedometer cable: 2.6 mm · Ø outside: 51.8 mm · Ø Receptacle: 48 mm · Thread type: MF11x0.75 (fine pitch thread) · Depth: 50 mm · Total height: 68 mm
EUR 86.60
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
EUR 61.80
Plastic license plate holder (CH version)
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Total length: 175 mm · Ø mounting hole: 6 mm · Thread length: 6 mm · Height: 11 mm · Width: 108 mm · Number of fixing points: 9 pcs · Hole spacing: 50 mm
EUR 9.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Stock number: 6001 · Bearing type: Deep groove ball bearing · Ø outside: 28 mm · Ø inside: 12 mm · Width: 8 mm · Ball bearing closed: Yes · Area of application: Standard
EUR 7.30
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
EUR 24.70
Collection only possible with online purchase and appointment.
