Black, adjustable dampers with fancy red coil springs for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Ø outside | 50 mm |
| Manufacturer | GPO |
| Surface | varnished |
| Color | red, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 300 mm |
| Total length | 330 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Ø outside: 52 mm · Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Ø spars: 32 mm · Adjustable: Yes · Total length: 335 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Mounting type: Nuts & bolts
EUR 159.90
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.70
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread)
EUR 22.00
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Hole spacing: 300 mm · Material: Aluminum · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø spars: 24 mm · Total length: 335 mm · Color: Chrome · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 61.40
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Height: 5.3 mm · Manufacturer: GPO · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm · Material: Chrome steel (colloquially known as stainless steel) · Width: 105 mm · Total length: 145 mm · Color: silver · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 13.40
Working late? Evening hours on Thursday until 20:00
