Black, adjustable shock absorbers with neon green coil springs for your moped, moped and small motorcycle.
The height and preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Surface | varnished |
| Color | neon green, black |
| Damping type | Spring |
| Ø outside | 50 mm |
| Adjustable | Yes |
| Total length | 330 mm |
| Mounting type | Nuts & bolts |
| Ø spars | 30 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Adjustable: Yes · Ø spars: 32 mm · Mounting type: Nuts & bolts · Ø outside: 52 mm · Hole spacing: 330 mm · Ø Fastening inside: 10 mm · Total length: 335 mm · Number of fixing points: 2 pcs
EUR 172.20
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 22.00
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Total length: 335 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø outside: 46 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm
EUR 61.40
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Ø bore: 4 mm · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock
EUR 15.40
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.20
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Drive: External hexagon · Height: 13.8 mm · Thread type: MF26x1 (fine pitch thread) · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Thread depth: 12 mm · Width across flats: 30 mm · Area of application: Standard
EUR 12.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
