High-quality replica tie rod for Zündungen with small Bosch flywheel, which were installed on Zündapp ZD 10, ZD 30, ZR 10, ZR 20, ZR 30, ZA 25 and ZA 40 mopeds, among others.
Hole spacing (center - center): 46.5 mm
Hole diameter: 4.6 mm
For flywheels with an inner diameter of 80 mm
Original Zündapp spare part number: 249-07.908
Original BOSCH spare part number: 2 204 211 052
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Cable length | 68 mm |
| Manufacturer | GPO |
| Place of use | Internal (in the ignition) |
| Ø Internal flywheel | 80 mm |
| Ø cable holder | 6.1 mm |
| Total length | 69.7 mm |
| Ø mounting hole | 4.6 mm |
| Color | black |
| Height | 11 mm |
| Hole spacing | 46.5 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Screws |
| Area of application | Standard, Original |
Suitable for the following models
| Zündapp |
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
BERU breaker with cable | Bosch / Ducati
Cable length: 100 mm · Manufacturer: BERU · Material: Steel · Ø Internal flywheel: 90 mm · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · BOSCH OEM number: 1 217 013 025 · Alternative version of the Sachs OEM number: 0983 106 000 · BERU OEM number: 0 340 100 710
EUR 18.30
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Manufacturer: BERU · Material: Steel · Ø Internal flywheel: 80 mm · Area of application: Original · Area of application: Standard · Cable available: Yes · Number of fixing points: 1 pcs · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Pony OEM number: A2496 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · Minarelli OEM number: 82 000 16 · BERU OEM number: 0 340 100 458 · Fantic OEM number: 320 4500 5150
EUR 23.20
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23 mm · Ø outside: 18 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
EUR 12.20
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 98.10
Ignition cable Ø 5 x 450 mm (1A quality)
Manufacturer: Made in Germany · Material: Copper · Material: Plastic · Color: black · Total length: 450 mm · Suppressed: No · Component group Carburetor: Ignition cable · Ø cable: 5 mm · Pony OEM number: A4603 · Sachs OEM no.: 0965 133 001
EUR 4.20
EUR 9.33/m
Collection only possible with online purchase and appointment.
