Hook wrench suitable for the Sachs ¨union nut, which attaches the flame tube to the cylinder.
With this practical wrench, loosening and tightening the nut is no problem.
Suitable for both versions of exhaust nuts.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Material | Steel |
| Manufacturer | GPO |
| Surface | galvanized (blue) |
| Number of components | 1 pcs |
| Ø inside | 45 mm, 50 mm |
| Total length | 260 mm |
| Width | 70 mm |
| Height | 5 mm |
| Area of application | Workshop accessories |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
| Cilo | 502 / 502t |
Accessories & related products
swiing® revival exhaust nut M35x2 galvanized | Sachs 50/2 (A1507)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M35x2 (standard thread) · Nut type: Union nut · Ø outside: 43 mm · Ø inside: 30 mm · Pony OEM number: A1507 · Sachs OEM no.: 0242 048 101
EUR 18.30
swiing® ingenious hook wrench M40 exhaust nut | Sachs 50/2
Material: Rubber · Material: Steel · Surface: galvanized (blue) · Total length: 280 mm · Width: 67 mm · Height: 5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 46 mm · Number of components: 1 pcs · Ø inside: 33 mm · Area of application: Workshop accessories · Weight: 300 g
EUR 30.50
swiing® ingenious hook wrench M35 exhaust nut | Sachs 50/2
Material: Rubber · Material: Steel · Surface: galvanized (blue) · Total length: 280 mm · Width: 63 mm · Height: 5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 43 mm · Number of components: 1 pcs · Ø inside: 30 mm · Area of application: Workshop accessories · Weight: 300 g
EUR 30.50
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 12.10
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.10
EUR 26.89/l
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Total length: 120 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool
EUR 53.80
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 24.40
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Height: 16 mm · Manufacturer: swiing® revival parts · Ø outside: 75 mm · Number of components: 4 pcs · Ø inside: 64 mm · Area of application: Special tool · Thread type: M6x1 (standard thread) · Thread length: 40 mm · Sachs OEM no.: 0276 057 000
EUR 36.70
Not in stock
swiing® revival puller clutch basket manual | Sachs
Width across flats Screw: 19 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Number of components: 4 pcs · Thickness: 25 mm · Total length: 106 mm · Area of application: (Dis)assembly tool
EUR 40.30
GPO piston pin extractor Ø 10, 12, 14 mm
Material: Steel · Surface: burnished · Total length: 130 mm · Manufacturer: GPO · Number of components: 7 pcs · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 24.40
Collection only possible with online purchase and appointment.
