Black pair of handlebar grips with gray flame decor for your moped, moped or small motorcycle.
One set consists of one grip cover each with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, you therefore need to order two grip sets. The handle ends are closed, but can be opened individually if required (e.g. for mounting a side mirror).
| Manufacturer | GPO |
| Material | Rubber |
| Color | black, gray |
| Ø inside | 22 mm, 24 mm |
| Total length | 125 mm |
Ratings
Accessories & related products
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Fork plate · Clamping diameter: 22 mm · Ø outside: 22 mm · Fork plate holder length: 100 mm · Length handlebar ends: 150 mm · Width: 730 mm · Height: 400 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm
EUR 44.50
Handlebar fork plate 15 cm cross chrome
Material: Steel · Color: Chrome · Height: 150 mm · Surface: chrome-plated · Width: 710 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Fork plate holder length: 110 mm · Mounting type: Fork plate · Length handlebar ends: 155 mm · Crossbar: Yes · Ø Strut: 12 mm · Strut length: 220 mm
EUR 30.90
GPO light switch with wiring harness base chrome version
Cable length: 970 mm · Manufacturer: GPO · Material: Plastic · Number of cables: 5 pcs · Housing material: Steel · Surface: chrome-plated · Color: Chrome · Substructure material: Steel · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Ø Handlebars: 22 mm · Number of positions: 3 pcs · Cable bifurcation to motor: 970 mm · Total length: 50 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Width: 30 mm · Height: 25 mm
EUR 20.90
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.50
Not in stock
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Mounting type: Screws · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Total length: 47 mm
EUR 14.80
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 12.30
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.30
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 16.00
Collection only possible with online purchase and appointment.
