A pair of CNC-milled and gold anodized aluminium vibration dampers with rounded edges for your moped, moped and small motorcycle.
Fits all handlebar ends with a diameter of 17 mm.
Ø outside: 22 mm
Ø clamping range: 17 mm
Total length: 56 mm
Protruding length: 23 mm
Alternative vibration dampers can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Aluminum |
| Color | gold |
| Surface | anodized |
| Total length | 56 mm |
| Ø inside | 17 mm |
| Ø outside | 22 mm |
| Number of components | 2 pcs |
Ratings
Accessories & related products
Explore categories from Handlebar & stem
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Strength class: 8.8 · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs
EUR 11.80
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.05
Transval speedometer drive 17" with grease nipple
Total height: 52 mm · Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · Color: gray · Wheel size: 17 " · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · Ø axle: 11 mm · Overall width outside: 60 mm · Ø mounting hole: 11 mm · Thread type: MF10x1 (fine pitch thread)
EUR 35.80
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 50 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 36.5 mm · Total length: 42 mm · Height: 40 mm · Height: 48 mm
EUR 14.20
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Surface: nickel-plated · Total length: 34.5 mm · Total length: 42 mm · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm · Height: 56 mm · Height: 61 mm · Angle: 45 °
EUR 8.25
Not in stock
GPO sprocket 41 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Number of teeth: 41 pcs · Ø inside: 94 mm · Ø bolt circle: 106 mm · Ø mounting hole: 6.5 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 29.80
Collection only possible with online purchase and appointment.
