Throttle cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing or Dell'Orto carburettors.
The throttle cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburetor elbows and throttle cables can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Component group Carburetor | Adjusting screws, float, etc. |
| Material | Brass |
| Ø outside | 6 mm |
| Thread type | MF6x0.75 (fine pitch thread) |
| Total length | 35 mm, 41.5 mm |
| Internal thread | M5x0.8 (standard thread) |
| Angle | 70 ° |
| Width across flats nut | 8 mm |
| Height | 36 mm, 37 mm |
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
| Zündapp Belmondo |
Ratings
Accessories & related products
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard
EUR 2.95
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Total length: 45.5 mm · Total length: 53.5 mm · Angle: 85 ° · Width across flats nut: 8 mm · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.25
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 43 mm · Total length: 52 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Height: 27 mm · Angle: 90 °
EUR 14.60
Dell'Orto 57° / 70° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Angle: 57 ° · Angle: 70 °
EUR 17.10
43° cable pull pipe bend
Ø outside: 6 mm · Ø outside: 10 mm · Total length: 63.5 mm · Total length: 72.5 mm · Height: 26 mm · Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: Made in Germany · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 43 °
EUR 9.70
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Thread type: MF6x0.75 (fine pitch thread)
EUR 8.45
90° carburetor pipe bend M6x0.75 Dell'Orto SHA original | Piaggio Ciao
Manufacturer: Piaggio · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 27.5 mm · Angle: 90 ° · Height: 30 mm
EUR 6.00
Nut carburetor pipe bend Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Height: 3 mm · Width across flats SW: 8 mm · Thread type: MF6x0.75 (fine pitch thread)
EUR 2.95
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 40 mm · Total length: 49 mm · Angle: 90 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Height: 32 mm
EUR 8.45
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard
EUR 2.95
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Thread type: MF12x1 (fine pitch thread) · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm
EUR 2.45
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Total length: 45.5 mm · Total length: 53.5 mm · Angle: 85 ° · Width across flats nut: 8 mm · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.25
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 6.00
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Thread type: MF6x0.75 (fine pitch thread)
EUR 8.45
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 45 ° · Ø outside: 6 mm · Total length: 34.5 mm · Total length: 42 mm · Height: 56 mm · Height: 61 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread)
EUR 8.45
Collection only possible with online purchase and appointment.
