21 mm PHBG replica racing carburetor for universal use for your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 75 cc.
The tuning carburetor has a cable-operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary air flow as well as the mixture adjustment screw.
The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.
Main thread size (M5): 90 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 60
Air filter connection diameter: 32 mm (M32 x 1.25)
Connection diameter of intake manifold: 24 mm (or 26 mm after removing the reducer sleeve)
Total height: 130 mm
Total width: 75 mm
Matching nozzles, air filters and intake manifolds can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Component group Carburetor | Carburetor complete |
| Area of application | Tuning |
| Width | 75 mm |
| Carburetor type | PHBG AD |
| Height | 130 mm |
| Nominal diameter | 21 mm |
| Ø fuel hose connection | 6 mm |
| Ø without reducing sleeve | 26 mm |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 32 mm |
| Mounting type | Plug connection clamped |
| Air filter connection thread | MF32x1.25 (fine pitch thread) |
| Mixed oil connection | Yes |
| Choke control | Cable choke |
| Choke nozzle size | 60 |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 90 |
| Size of secondary nozzle | 50 |
Ratings
Accessories & related products
18.5 mm intake manifold Dell'Orto PHBG | Puch E50
Ø inside: 18.8 mm · Material: Aluminum · Surface: polished · Color: Chrome · Total length: 40 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total height: 57 mm · Height flange center hole: 45 mm · Ø External connection: 23.9 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Tuning
EUR 21.40
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 25.00
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 25.00
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100
EUR 25.00
swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120
EUR 4.20
66HEROES Mushroom air filter grille 28 - 32 mm black
Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Area of application: Tuning · Filter type: Grille · Color: black · Ø outside: 60 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Total length: 114 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 19.00
Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
Drive: Slot · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70
EUR 5.85
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Ø wire: 2.4 mm · Ø inside: 25.5 mm · Material: Spring steel · Surface: galvanized (blue) · Ø outside: 30 mm · Total length: 125 mm · Area of application: Original · Area of application: Standard
EUR 5.85
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Total length: 28 mm · Ø inside: 4.8 mm · Number of components: 3 pcs · Ø outside: 8.3 mm
EUR 21.40
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread)
EUR 11.80
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4.15 mm · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm
EUR 40.50
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 7 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.40
Intake manifold 46 / 47 mm cylinder | Puch
Ø inside: 19 mm · Material: Aluminum · Total length: 60 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total height: 75 mm · Height flange center hole: 65 mm · Ø External connection: 24 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Tuning
EUR 47.70
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Nominal diameter: 43 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Camouflaged: No
EUR 251.00
Collection only possible with online purchase and appointment.
