Front, partially round mudguard made of bright steel for your Piaggio Ciao moped with 16" cast or 17" spoke rims.
For mounting the mudguard, all original holes are provided to mount the mudguard to the front of the original fork. In addition, the three holes on the right-hand side are intended for mounting the original cable routing. There are also two holes for attaching the original edge protection or splash guard flap.
| Material | Steel |
| Surface | blank |
| Mounting type | Nuts & bolts |
| Folding the ends | open folded |
| Shape of the mudguard | partly round |
| Total length over ends | 510 mm |
| Scope | 640 mm |
| Wide mudguard profile | 76 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 162 mm |
| Wheel size [inch] | 16 ", 17 " |
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
swiing® revival front fender Inox | Piaggio Ciao
Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Piaggio OEM number: 274184
EUR 42.80
Moped fans also bought
GPO license plate holder Inox (CH version)
Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (known as Nirosta®) · Color: silver · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm
EUR 13.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.10
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.45
swiing® revival screw footboard / headlight Inox | Piaggio Ciao P, SC, PX
Drive: Slot · Manufacturer: swiing® revival parts · Total length: 17 mm · Material: Chrome steel (known as Nirosta®) · Screw head: Lens head · Ø External head: 13.8 mm · Thread type: M6x1 (standard thread) · Piaggio OEM number: 102986 · Piaggio OEM number: 259349
EUR 6.00
swiing® revival rear fender Inox | Piaggio Ciao
Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Piaggio OEM number: 576135
EUR 42.80
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 24.40
Handlebar Ø 21 mm with stem 23.5 cm | Piaggio Ciao
Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 600 mm · Height: 260 mm · Manufacturer: Made in Italy · Ø outside: 22 mm · Mounting type: Front boom mounting · Ø Stem: 21 mm · Stem height: 160 mm · Length handlebar ends: 160 mm · Crossbar: No
EUR 85.70
Collection only possible with online purchase and appointment.
