Complete standpipe set suitable for Puch Maxi S & N mopeds / mopeds.
The set consists of left & right fork leg, spring inserts, cover sleeves, rubber springs and sliding bushes.
Ø fork leg: 23 mm
Block for brake anchor plate: 74 x 16/8 x 16 mm (LxWxH)
Total length: 495 mm
Below block to below fork leg: 46 mm
Spring length incl. insert: 210 mm. Insert: 210 mm
Note: This is a cheap reproduction product that cannot be compared with the original fork legs.
The springs are slightly longer, which means that the sliding bush protrudes slightly from the steerer tube. In addition, the welded-on tab on the fork leg may need to be compressed slightly so that it fits into the brake anchor plate.
Accessories for the dip tubes such as reinforced springs can be found in the accessories section.
Good-quality reproduction product from the Asian market.
Details
| Manufacturer | Quenching |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Total length | 578 mm |
| Ø spars | 23 mm |
| Distance brake cam to wheel axle center-center | 38 mm |
Suitable for the following models
| Puch |
Accessories & related products
EBR standard fork chrome | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Adjustable: No · Ø spars: 23 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Total length: 570 mm · Fork bridge - center wheel axle: 383 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
EUR 156.90
66HEROES screw M8x25 fork plate Inox | Puch
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 17 mm · Shank: No · Total length: 29.5 mm · Thread length: 25 mm
EUR 10.70
EBR fork with lock black | Puch Maxi
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Adjustable: No · Ø spars: 23 mm · Spar end distance (center-center): 120 mm · Ø outer head tube: 26.2 mm · Ø head tube inside: 22.3 mm · Head tube length: 180 mm · Total length: 580 mm · Fork bridge - center wheel axle: 385 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
EUR 192.60
Moped fans like you also bought:
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Total length: 40.8 mm · Width: 17 mm · Length of turned part: 25.6 mm · Ø outside: 12 mm · Ø Pin: 8 mm
EUR 12.00
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
EUR 12.00
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread)
EUR 15.60
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Area of application: Standard · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Height: 13.8 mm · Thread depth: 12 mm · Width across flats SW: 30 mm
EUR 12.00
Collection only possible with online purchase and appointment.
