Fork uprights (pair) conditionally suitable for Sachs Pony Junior City 503 mopeds / mopeds and some other related models with 17" rims.
Length uprights: 490 mm
Total length with spring and spring mount: 575 mm
Ø fork uprights: 24.1 mm
Ø Bolt brake anchor plate: 10 mm
Lower edge of fork leg to center of bolt brake anchor plate: 95 mm
Ø Spring mount: 25 mm
Spring mount thread: M8x1.25
Top edge of fender flap to below fork leg: 102 mm
Length of fender flap: 35 mm
Hole spacing center - center of fender flap: 22 mm
Notes: The holes for the sliding bushes are 1 mm smaller than the original and may need to be drilled out. In addition, the hole in the original bars (measured from the lower edge of the bar to the middle of the hole) is 235 mm high, whereas this reproduction product is 275 mm high.
The diameter of the original bars is approx. 23.8 mm, whereas this product is approx. 24.1 mm. This means that adjustments may need to be made to the sliding bushes.
The attached tabs correspond to the design for 17" rims or mudguard arches. Pony Junior 503 models with 19" rims require adjustments to the bars or the strut for the mudguard. On the bars for the 19" models, the lugs are fitted higher up as standard.
You can find more parts for your Pony Junior in the accessories section.
| Material | Steel |
| Surface | chrome-plated |
| Total length | 490 mm, 580 mm |
| Adjustable | No |
| Color | Chrome |
| Ø spars | 24 mm |
| Distance brake cam to wheel axle center-center | 80 mm |
| Sachs |
Ratings
Accessories & related products
Main stand | Pony Junior 503
Manufacturer: Made in Switzerland · Material: Steel · Surface: chrome-plated · Color: Chrome · Stand base - center mount (A): 210 mm · Total width of stand base (B): 215 mm · Wide receptacle (C): 40 mm · Ø Receptacle (D): 9 mm · Spring nipple distance - center pivot axis (E): 60 mm · Wide upright foot (F): 25 mm · Total height: 233 mm
EUR 116.80
EBR fork (replica) | Pony Junior
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Adjustable: No · Ø spars: 23 mm · Spar end distance (center-center): 120 mm · Ø outer head tube: 25.65 mm · Ø head tube inside: 24.3 mm · Head tube length: 205 mm · Total length: 595 mm · Fork bridge - center wheel axle: 375 mm · Distance brake cam to wheel axle center-center: 35 mm · Distance brake cam to wheel axle center-center: 85 mm · Thread type: FG25.4 (1" 24G) · Thread length: 58 mm
EUR 246.00
Explore categories from Fork
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 50 mm
EUR 33.90
Not in stock
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard
EUR 2.95
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.95
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Area of application: Standard · Cable length: 2000 mm · Nipple length: 5.5 mm · Number of components: 1 pcs
EUR 4.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
