Transparent float chamber suitable for Bing SRE, SRC, SRF and the SRA 1/11/35 carburetor. This float chamber was installed on Puch Maxi, X30, Velux, Sachs and Zündapp Belmondo mopeds, among others.
The transparent material means you always have the fuel mixture in view and can immediately see the float level and whether deposits are forming in the chamber.
The float cover can be permanently fitted. When tightening, make sure that it is only tightened lightly by hand, as with the original cap.
Ø outer: 44 mm
Total height: 31 mm
Slot width (SW): 19 mm
You can find the original float cap and various revision products for your carburettor in the accessories section.
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SRE, SRC, SRF |
| Ø outside | 44 mm |
| Height | 31 mm |
| Width across flats | 19 mm |
| Number of fixing points | 1 pcs |
| Puch | |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Ratings
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Material: Aluminum · Height: 32.5 mm · Manufacturer: BING · Ø outside: 43.5 mm · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Width across flats: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
EUR 23.40
swiing® revival seal Float SRE, SRC, SRF, SRA
Material: Sealing paper · Ø inside: 41 mm · Manufacturer: swiing® revival parts · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
BING 15 mm Bing original carburetor (1/15/46A)
Nominal diameter: 15 mm · Material: Aluminum · Total length: 66 mm · Height: 95 mm · Manufacturer: BING · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Standard · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 164.70
GPO gasket set carburetor Bing SRE
Material: Sealing paper · Ø inside: 7.8 mm · Ø inside: 41 mm · Manufacturer: GPO · Ø outside: 12.2 mm · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Camouflaged: No
EUR 6.05
BING Carburetor cover Bing SRE (original)
Material: Aluminum · Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRE · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
EUR 19.70
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Color: white · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 37.10
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Material: Steel · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard
EUR 2.95
swiing® revival seal Float SRE, SRC, SRF, SRA
Material: Sealing paper · Ø inside: 41 mm · Manufacturer: swiing® revival parts · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 12.30
EUR 27.33/l
BING rubber grommet Ø 8 mm carburetor pipe bend
Material: Rubber · Color: black · Total length: 29 mm · Ø inside: 8 mm · Manufacturer: BING · Ø outside: 12 mm · Clamping diameter: 4 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.85
GPO gasket set carburetor Bing SRE
Material: Sealing paper · Ø inside: 7.8 mm · Ø inside: 41 mm · Manufacturer: GPO · Ø outside: 12.2 mm · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Camouflaged: No
EUR 6.05
- 10 %
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Material: Aluminum · Total length: 66 mm · Height: 95 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 99.00
EUR 89.10
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Color: white · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 37.10
Collection only possible with online purchase and appointment.
