Camouflaged 28 mm aftermarket exhaust system compatible with your Puch Maxi S / N moped. Also compatible with Puch X30 Sport NS / NL mopeds, though it’s a very tight fit.
Unlike an original exhaust, this 2-piece, camouflaged exhaust system features a larger exhaust manifold, which is particularly well-suited for a tuned engine setup. To allow you to enjoy every ride discreetly in the finest spy-like fashion during everyday use, the original Puch numbers and the Puch logo are engraved on the exhaust system.
Engraved number:
251.1.23.000.3
Note: The M7 screw at the end of the flame tube must be secured with an additional nut to prevent the nut from coming loose and the muffler insert from falling out.
The crimp ring between the flame tube and the exhaust jacket is not of exceptional quality and should therefore be replaced with a high-quality version.
You can find the crimp ring in question, locknuts, and other exhaust systems in the accessories section.
A high-quality product manufactured in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø outside | 58 mm |
| Total length | 915 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Flute |
| Mounting type | Welded lug, Stud bolts & nuts |
| Flame tube attachment | Flange |
| Number of fixing points | 4 pcs |
| Puch | E50 |
Accessories & related products
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 59 mm · Total length: 910 mm · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange · Number of fixing points: 4 pcs
EUR 166.00
TECNO exhaust 28 mm 2-piece | Puch Maxi S, N / X30
Manufacturer: TECNO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 915 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø outside: 58 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 73.70
Normio M7 Galvanized Nut
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut · Height: 5.3 mm · Drive: External hexagon · Thread type: M7x1 (standard thread) · Nominal diameter (thread): 7 mm · Width across flats: 11 mm · Strength class: 8
EUR 1.00
Stop nut M7 Inox
Manufacturer: Normio · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Self-securing nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm
EUR 0.85
Explore categories from Exhaust system
Moped fans also bought
Normio M7 Galvanized Lock Nut
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Self-securing nut · Height: 7.3 mm · Drive: External hexagon · Thread type: M7x1 (standard thread) · Nominal diameter (thread): 7 mm · Thread depth: 4.8 mm · Width across flats: 11 mm · Strength class: 8
EUR 1.10
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 98.30
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Total length: 46 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Total height: 53 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 43.00
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
EUR 9.10
Working late? Evening hours on Thursday until 20:00
