Chromed EBR fork with reinforced bars.
For various mopeds. E.g. Zündapp Belmondo, Sachs 50/2, Hercules etc.
Bolt to attach the brake anchor plate is located on the right side. 7 cm above the center of the wheel axle.
With clamp for attaching the handlebars to the fork plate.
Two M6 threaded bolts are provided for attaching the mudguard. The distance of these bolts is adjustable and can be varied from 15 to 50 mm.
Internal diameter head tube (for stem mounting): 22 mm
Head tube length: 20 cm
Length center wheel axle to lower edge of lower fork crown: 41 cm
Total length: 64 cm
Thread: M26x1
Thread length on head tube: 3 cm
Suitable headset sets can be found below in the accessories section.
Branded product of the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Steel |
| Surface | chrome-plated |
| Adjustable | No |
| Ø spars | 28 mm |
| Color | Chrome |
| Spar end distance (center-center) | 140 mm |
| Ø outer head tube | 26 mm |
| Thread type | MF26x1 (fine pitch thread) |
| Ø head tube inside | 22.3 mm |
| Head tube length | 200 mm |
| Thread length | 58 mm |
| Fork bridge - center wheel axle | 410 mm |
| Distance brake cam to wheel axle center-center | 70 mm |
| Total length | 635 mm |
| Sachs |
| Zündapp Belmondo |
| Hercules |
Ratings
Accessories & related products
Moped fans also bought
swiing® revival light switch MERIT two buttons
Manufacturer: swiing® revival parts · Material: Plastic · Color: Chrome · Color: black · Surface: chrome-plated · Substructure material: Plastic · Housing material: Steel · Ø Handlebars: 22 mm · Width: 27 mm · Height: 30 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Total length: 55 mm · Number of positions: 3 pcs
EUR 23.20
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Height: 13.8 mm · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Width across flats SW: 30 mm · Thread depth: 12 mm · Area of application: Standard
EUR 12.20
Not in stock
swiing® ingenious steering bearing M26x1 (for Ø 30 mm steering head tube) High End
Material: Steel · Surface: gas nitrided · Color: black · Manufacturer: swiing® ingenious parts · Ø inside: 26.8 mm · Bearing type: Bearing ring · Ø outside: 43 mm · Ø mounting frame: 30.3 mm · Thread type: MF26x1 (fine pitch thread)
EUR 67.50
Collection only possible with online purchase and appointment.
