Fork specially made for Zündapp Belmondo mopeds!
The chrome-plated fork fits perfectly and no further adjustments are necessary.
The two tabs for attaching the upper and lower struts are perfectly modeled on the original.
You will find the matching headset set and other add-on parts in the accessories section below.
The snap ring is supplied as shown.
Total fork length: 64 cm
Head tube length: 18.5 cm
Head tube thread: M26x1
Head tube inner diameter (for stem mounting): 22 mm
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Total length | 640 mm |
| Spar end distance (center-center) | 140 mm |
| Ø outer head tube | 26 mm |
| Ø spars | 28 mm |
| Ø head tube inside | 22.1 mm |
| Head tube length | 185 mm |
| Thread type | MF26x1 (fine pitch thread) |
| Thread length | 58 mm |
| Fork bridge - center wheel axle | 420 mm |
| Distance brake cam to wheel axle center-center | 72 mm |
| Zündapp Belmondo |
Accessories & related products
Lower front fender strut Inox | Zündapp Belmondo
Manufacturer: Made in Switzerland · Material: Chrome steel (known as Nirosta®) · Color: Chrome · Total length: 305 mm · Distance mudguard - center hole: 280 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs
EUR 83.20
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Thread depth: 12 mm · Width across flats SW: 30 mm · Height: 13.8 mm · Area of application: Standard
EUR 12.10
Not in stock
GPO steerer tube nut M26x1 open stem chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Ø inside: 22.1 mm · Nut type: Flange nut · Ø outside: 36.5 mm · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Thread depth: 11.5 mm · Width across flats SW: 30 mm · Height: 14 mm
EUR 15.80
swiing® revival upper front mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 200 mm · Hole spacing: 20 mm · Hole spacing: 25 mm · Mounting type: Nuts & bolts · Number of fixing points: 7 pcs
EUR 41.10
swiing® revival lower front mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 305 mm · Distance mudguard - center hole: 280 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs
EUR 44.00
Moped fans also bought
swiing® revival gasket outlet | Zündapp Belmondo
Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Graphite / Graphite · Place of use: Outlet · Ø inside: 25 mm · Ø outside: 38.3 mm · Total length: 53 mm · Ø mounting hole: 7.1 mm · Hole spacing: 40 mm · Number of fixing points: 2 pcs
EUR 4.80
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
EUR 12.10
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm · Mounting type: Nuts & bolts
EUR 97.90
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Thread depth: 12 mm · Width across flats SW: 30 mm · Height: 13.8 mm · Area of application: Standard
EUR 12.10
Not in stock
swiing® revival upper front mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 200 mm · Hole spacing: 20 mm · Hole spacing: 25 mm · Mounting type: Nuts & bolts · Number of fixing points: 7 pcs
EUR 41.10
swiing® revival lower front mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 305 mm · Distance mudguard - center hole: 280 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs
EUR 44.00
Collection only possible with online purchase and appointment.
