Black, adjustable shock absorbers for your moped, scooter, and small motorcycle.
The stiffness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mounting point to mounting point): 260 mm
; Outer diameter of coil spring: 44 mm
; Shaft diameter: 28 mm
; Sleeve diameter for mounting: 10 mm
The rear springs should always be secured with large U-washers to prevent the plastic bushings from shifting when lateral forces are applied.
The package includes one pair.
Rear springs from other manufacturers, the matching adjustment wrench, as well as the washers and mounting hardware can be found in the accessories section.
Brand-name product from the manufacturer DMP.
| Manufacturer | DMP |
| Surface | varnished |
| Material | Steel |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 28 mm |
| Total length | 290 mm |
| Ø Fastening inside | 10 mm |
| Color | black |
| Mounting type | Nuts & bolts |
| Ø outside | 44 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 260 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 27.00
EUR 2’700.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.70
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread)
EUR 22.00
MKX shock absorber 26 cm chrome
Surface: chrome-plated · Total length: 295 mm · Manufacturer: MKX · Ø outside: 46 mm · Number of fixing points: 2 pcs · Hole spacing: 260 mm · Color: Chrome · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm
EUR 61.40
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Ø spars: 280 mm · Adjustable: Yes · Total length: 310 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 280 mm
EUR 159.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats: 7 mm · Area of application: Standard · Thread type: M6x1 (standard thread) · Thread length: 7 mm
EUR 3.05
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Diameter: 5.95 mm · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Thread length: 12 mm
EUR 2.20
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.45
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
EUR 15.90
Working late? Evening hours on Thursday until 20:00
