Product description

40 mm cylinder suitable for your Honda Camino moped / moped.

The cast steel cylinder is of good quality and is solidly made.
The piston clearance and piston ring clearance should be checked before installation.

Cylinder material: cast iron
Piston material: cast aluminum
Bore: 40 mm
Capacity: 49 cm³
Ø Cylinder base: 50.9 mm
Ø outlet inside: 34 mm
Hole spacing outlet: 46 mm
Thread outlet: M6 x 1
Hole pattern: 48 x 48 mm
Ø stud bolt hole: 7 mm
Piston pin: 10 mm
Decompressor bore: yes

Scope of delivery as per figure 1.

Matching exhaust systems and other practical parts can be found in the accessories section.

Branded product from the manufacturer DMP.

Product details

Manufacturer	DMP
Camouflaged	No
Area of application	Standard
Material	Gray cast iron
Surface	varnished
Displacement	50 ccm
Nominal diameter	40 mm
Ø cylinder neck	50.9 mm
Ø Outlet outside	34 mm
Hole pattern [mm]	48 x 48

Number of fixing points	4 pcs
Ø piston pin (B)	10 mm
Outlet type	slanted
Hole spacing outlet	46 mm
Thread outlet	M6x1 (standard thread)
Decompressor	Yes

Suitable for the following models

Honda

Accessories & related products

For: Honda

23508

Malossi 45.5 mm cylinder kit | Honda Camino

Manufacturer: Malossi · Material: Gray cast iron · Nominal diameter: 40 mm · Surface: varnished · Ø piston pin (B): 10 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Tuning

EUR 245.10

For: Honda

28398

Breaker without cable | Honda Camino

Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: No · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm

EUR 24.20

PROMA Circuit Exhaust | Honda Camino, Hobbit PA50

For: Honda

28656

PROMA Circuit Exhaust | Honda Camino, Hobbit PA50

Manufacturer: PROMA · Material: Steel · Surface: varnished · Ø Silencer: 43 mm · Total length: 540 mm · Exhaust type: Snail · Number of fixing points: 2 pcs · Flame tube attachment: Flange · Mounting type: Welded lug

EUR 170.30

For: Honda

31268

Exhaust Ø 22 mm | Honda Camino PA50

Manufacturer: Made in Portugal · Material: Steel · Color: black · Surface: varnished · Ø Internal connection: 19.5 mm · Ø Flame tube outside: 22 mm · Number of fixing points: 4 pcs · Flame tube attachment: Stud bolts & nuts · Mounting type: Flange

EUR 85.70

Polini gasket set 46 mm racing kits | Honda Camino 50, PX50

For: Honda

31279

Polini gasket set 46 mm racing kits | Honda Camino 50, PX50

Manufacturer: Polini · Material: Copper · Material: Sealing paper · Ø cylinder: 46 mm · Thickness: 0.5 mm · Number of components: 3 pcs · Hole pattern [mm]: 48 x 48 mm · Area of application: Tuning

EUR 18.30

HPI racing ignition without light | Honda Camino PA50

For: Honda

31360

HPI racing ignition without light | Honda Camino PA50

Manufacturer: HPI · Weight: 424 g · Area of application: Tuning

EUR 367.70

Moped fans also bought

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10040

KMC drive chain 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: gray · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Ø bore: 4 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm

EUR 15.30

RMS V-belt Mono 960 mm (original) | Piaggio Ciao

For: Piaggio

16363

RMS V-belt Mono 960 mm (original) | Piaggio Ciao

Manufacturer: RMS · Material: Fabric insert · Material: Rubber · Outer width: 9.8 mm · Gearbox type: Mono · Rolling circumference: 960 mm · Belt profile: untoothed / untoothed · Height: 8.5 mm

EUR 17.00

swiing® revival screw-in condenser | Bosch / Ducati

For: Puch · Sachs · Zündapp Belmondo · Tomos · DKW · Hercules · Kreidler · Zündapp · KTM · Rixe

17949

swiing® revival screw-in condenser | Bosch / Ducati

Manufacturer: swiing® revival parts · Area of application: Original · Area of application: Standard · Capacity: 0.16 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23 mm · Ø outside: 18 mm · BOSCH OEM number: 2 207 330 050

EUR 12.10

Polini air filter | Piaggio Ciao, SI, Bravo, Boxer

For: Piaggio

18904

Polini air filter | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: Polini · Area of application: Tuning · Material: Plastic · Color: black · Filter type: Foam · Total length: 29 mm · Width: 98 mm · Mounting type: Plug connection clamped · Height: 94.7 mm · Ø outside: 53 mm · Ø Internal connection: 50.6 mm · Camouflaged: No

EUR 18.30

For: Puch · Piaggio · Zündapp Belmondo · Solex · Cilo

21313

NTN 6202 C3 ball bearing 15/35/11

Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: C3 · Bearing type: Deep groove ball bearing · Ø outside: 35 mm · Ø inside: 15 mm · Stock number: 6202 · Width: 11 mm · Puch OEM number: 900.4.6202

EUR 7.25

Not in stock

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Solex · Alpa Chopper / Turbo · Cilo

26581

ESJOT Standard pedal chain

Chain pitch: 1/2" x 1/8" · Chain type: 410 · Manufacturer: ESJOT · Material: Steel · Color: gray · Surface: blank / oiled · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock

EUR 18.30

For: Honda

31268

Exhaust Ø 22 mm | Honda Camino PA50

EUR 85.70

GPO piston 43 mm | Sachs 50/2, 50/3, 50/4

For: Sachs

32603

GPO piston 43 mm | Sachs 50/2, 50/3, 50/4

Nominal diameter: 43 mm · Manufacturer: GPO · Thick piston ring: 1.8 mm · Ø outside piston (A): 42.94 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm

EUR 55.00

Collection only possible with online purchase and appointment.

DMP 40 mm cylinder kit | Honda Camino