Rubber sleeve for pipe bend and adjusting screw for various Dell'Orto SHA and PHBG carburetors, which are fitted to Piaggio Ciao, Si, Bravo, Boxer, Pony Cross 521, Cilo Cross 521, Pony GTX 521, etc., among others. Mopeds / mopeds are installed.
Length: 30 mm
Ø inner bottom: 7 mm
Ø inner top: 4 mm
The seal protects against false air and unwanted water ingress.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Material | Rubber |
| Color | black |
| Ø inside | 7 mm |
| Ø inside 2 | 4 mm |
| Total length | 30 mm |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Tomos |
Ratings
Accessories & related products
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Manufacturer: BING · Material: Rubber · Color: black · Clamping diameter: 4 mm · Ø outside: 12 mm · Total length: 29 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.65
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.05
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm
EUR 8.25
Dell'Orto 30° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 30 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 43 mm · Total length: 50 mm · Height: 13 mm
EUR 14.20
Dell'Orto 90° carburetor elbow set M6x0.75 (long thread)
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Total length: 39 mm · Total length: 49 mm · Height: 31 mm · Ø outside: 6 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 90 °
EUR 14.20
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 34.5 mm · Total length: 42 mm · Height: 56 mm · Height: 61 mm · Angle: 45 °
EUR 8.25
Not in stock
Explore categories from Silent blocks & rubber parts
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm
EUR 3.00
EUR 2.65
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2.85
EUR 2.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.40
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Manufacturer: BING · Material: Rubber · Color: black · Clamping diameter: 4 mm · Ø outside: 12 mm · Total length: 29 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.65
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm
EUR 8.25
Collection only possible with online purchase and appointment.
