Petrol connection with crimped connection.
The swivel connection is suitable for Dell'Orto SHA type 3, 7 - 13 mm carburettors.
The filter, all seals and the fastening screw can be found in the accessories.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SHA (Piaggio) |
| Mounting type | Screws |
| Angle | 30 ° |
| Piaggio | Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24. Bravo, SUPERbravo
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SHA (Piaggio) · Color: black · Nominal diameter: 13 mm · Total length: 46 mm · Ø Internal connection: 16 mm · Height: 96 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Area of application: Tuning · Width: 60 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66
EUR 73.60
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Filter type: Foam · Color: black · Ø outside: 53.2 mm · Total length: 31.2 mm · Ø Internal connection: 51 mm · Height: 88.7 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Width: 95 mm
EUR 24.50
GPO mushroom air filter grille Dell'Orto SHA carburetor
Manufacturer: GPO · Material: Metal · Camouflaged: No · Material: Rubber · Ø outside: 87 mm · Filter type: Grille · Total length: 46.4 mm · Color: Chrome · Color: black · Mounting type: Bride · Mounting type: Plug connection clamped · Length rubber part: 17 mm · Length of filter section: 29.4 mm · Ø Internal connection: 60 mm · Area of application: Tuning
EUR 20.80
Moped fans also bought
Dell'Orto 57° / 70° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Angle: 57 ° · Angle: 70 ° · Width across flats nut: 7 mm
EUR 17.10
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 °
EUR 8.45
Oil seal NBR 17/25/4 A Gearbox Mono original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Ø outside: 25 mm · Width: 4 mm
EUR 7.25
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 20 mm · Ø outside: 30 mm · Width: 5 mm
EUR 7.25
Collection only possible with online purchase and appointment.
