Used cylinder cover with 38 mm combustion chamber diameter suitable for the Puch Ur-Maxi S and Ur-Maxi N moped / moped.
An original cylinder head from the CH model with small cooling fins, which is cooled by ambient air (airstream). This head has an M10x1 thread for mounting a decompressor.
Dimension (L x W x H): 13.5 x 12.5 x 5.5 cm
Thread decompressor valve: MF 10 x 1 mm
Used spare part which is in technically serviceable condition, signs of use are to be expected. The cylinder head is sandblasted, the sealing surface should be briefly ground flat for safety reasons.
You can find the matching decompressor valve in the accessories section.
Original Puch spare part number: 349.2.10.401.1
Manufacturer | Puch |
Material | Aluminum |
Area of application | Original |
Surface | sandblasted |
Ø cylinder | 38 mm |
Total length | 135 mm |
Width | 125 mm |
Height | 55 mm |
Number of fixing points | 4 pcs |
Decompressor | MF10x1 |
Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 40.30
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Area of application: Standard · Ø outlet inside: 22 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 9.05
swiing® ingenious 38 mm cylinder kit CH12 | Puch
Manufacturer: swiing® ingenious parts · Nominal diameter: 38 mm · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Outlet type: straight · Number of fixing points: 4 pcs · Camouflaged: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 122.50
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Drive: External hexagon · Width across flats SW: 10 mm · Total length: 106 mm · Thread type: M6x1 (standard thread) · Strength class: 10 · Strength class: 10.9 · Thread length: 15 mm · Thread length: 19 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 24.40
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 12.10
EUR 26.89/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Drive: External hexagon · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.05
GPO screw set for engine mounting, galvanized | Puch
Manufacturer: GPO · Thread type: M8x1.25 (standard thread) · Color: silver · Thread length: 23.5 mm · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 12 pcs · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 13 mm · Shank: Yes · Storage method: Sack · Dimension storage box: 100 x 90 x 10 · Strength class: 8.8
EUR 10.90
Athena 38 mm cylinder kit 50 cc camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Displacement: 50 ccm · Nominal diameter: 38 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.7 mm · Ø outlet inside: 24.4 mm · Number of fixing points: 4 pcs · Inlet window: 22 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Camouflaged: Yes
EUR 189.90
swiing® revival nozzle holder 2.20 Bing SRE & SRA
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Drive: External hexagon · Ø nozzle holder: 2.2 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 29.5 mm · Nozzle block: 2.20
EUR 10.20
Taillight (original) | Puch Velux X30
Material: Plastic · Test mark: none · Bulb holder: E10 · Number of fixing points: 1 pcs · Ø Receptacle: 3 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts · Width: 35 mm · Depth: 80 mm · Height: 75 mm · Color: gray · Color: red
EUR 58.70
Not in stock