Bing SSE 15 mm aftermarket tuning carburetor suitable for ILO / JLO mopeds / mopeds.
The racing carburetor also fits Puch MS, VS, MV and DS small engine bikes, provided that the additional flange (item 23645) is used.
If necessary, small adjustments are required to ensure that the air filter fits perfectly.
We recommend the adjustable nozzle (item 16038), which allows the fuel/air mixture to be optimally adjusted.
Hole spacing for cylinder connection: 32 mm
Main diameter: 14
You can find the slanted intake manifold described above, other carburetors and the innovative adjustable nozzle in the accessories section.
| Nominal diameter | 15 mm |
| Area of application | Standard, Tuning |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SSE |
| Ø fuel hose connection | 6 mm |
| Hole spacing inlet | 32 mm |
| Mounting type | Flange |
| Choke control | Cable choke |
| Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| ILO / JLO |
Ratings
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Choke control: Hand choke · Mounting type: Flange · Nozzle size: 50 · Area of application: Standard · Area of application: Tuning
EUR 95.50
BING Original floats Bing SSB, SSE & SSN
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Total length: 41.4 mm · Height: 23 mm · Ø outside: 22 mm · Pony OEM number: A1968 · Sachs OEM no.: 0261 003 001
EUR 34.60
Not in stock
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Total height: 2.7 mm · Total height: 9.7 mm · Mounting type: Stud bolts & nuts · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 31.70
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Nominal diameter: 12 mm · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Ø fuel hose connection: 6 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Hole spacing inlet: 32 mm · Mounting type: Flange · Choke control: Cable choke · Nozzle size: 50
EUR 102.70
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Number of components: 10 pcs · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard
EUR 23.80
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Ø cylinder: 45 mm · Surface: sandblasted · Total length: 135 mm · Candle thread: short · Width: 125 mm · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Number of fixing points: 4 pcs · Camouflaged: Yes · Area of application: Tuning
EUR 39.30
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Stock number: E15 · Bearing type: Shoulder bearing · Ø outside: 35 mm · Ø inside: 15 mm · Width: 8 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 29.80
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Total height: 2.7 mm · Total height: 9.7 mm · Mounting type: Stud bolts & nuts · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 31.70
Collection only possible with online purchase and appointment.
