Favourable 12 / 12 replica carburettor for your Piaggio Ciao moped / moped.
The carburettor has a manually operated choke / starter slide. The starter flap engages by pressing it down and is only returned to its original position by actuating the throttle cable (full throttle).
Carburettor type: SHA type 3 (SHA3)
Main thread size (M5): 48
Inlet connection diameter: 16 mm (or 18 mm after removing the reducer). 18 mm after removing the reducing sleeve)
Ø outside air filter connection: 50.5 mm
Ø passage on air filter side: 12 mm
Ø passage on intake manifold side: 12 mm
Total height: 87 mm (without pipe bend)
Total length: 45 mm
Total width: 60 mm
Note: The finish of the aftermarket carburettors varies. The idle throttle bore is not perfect on all of them. We also recommend that you clean the carburetor again before installation, as some metal shavings from production can be found in the carburetor. If you want to be on the safe side and avoid problems, go straight for the original Dell'Orto product.
You can find suitable jets, air filters and original Dell'Orto carburettors in the accessories section.
Good quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Material | Aluminum |
| Width | 60 mm |
| Camouflaged | No |
| Component group Carburetor | Carburetor complete |
| Area of application | Tuning |
| Carburetor type | SHA (Piaggio) |
| Nominal diameter | 12 mm |
| Ø Internal connection | 16 mm |
| Ø without reducing sleeve | 18 mm |
| Height | 104 mm |
| Ø Inside entrance | 12 mm |
| Ø Output inside | 12 mm |
| Ø Air filter connection | 50.5 mm |
| Ø fuel hose connection | 5.5 mm, 4.8 mm |
| Total length | 45 mm |
| Mixed oil connection | No |
| Mounting type | Plug connection clamped |
| Vacuum connection | No |
| Color | black |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 48 |
| Piaggio | Ciao - PX , C24 |
Accessories & related products
Hot 
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Color: black · Filter type: Foam · Width: 95 mm · Total length: 31.2 mm · Ø outside: 53.2 mm · Height: 88.7 mm · Mounting type: Plug connection clamped · Ø Internal connection: 51 mm · Area of application: Tuning
EUR 24.50
Air filter 2 PS (DGM) original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Plastic · Color: black · Filter type: Grille · Width: 94 mm · Total length: 26.5 mm · Ø outside: 51 mm · Height: 89 mm · Mounting type: Plug connection clamped · Ø Internal connection: 49.7 mm · Area of application: Original · Area of application: Tuning · Piaggio OEM number: 825417 · Piaggio OEM number: 1834235
EUR 19.60
Dell'Orto 12/12 SHA carburetor hand choke | Piaggio Ciao PX, C24
Nominal diameter: 12 mm · Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 60 mm · Choke control: Hand choke · Carburetor type: SHA (Piaggio) · Height: 110 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 55 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 48 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.6 mm · Ø Internal connection: 16 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning
EUR 79.90
Not in stock
swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120 · Drive: Slot
EUR 4.30
swiing® revival nozzle set M5 (32 - 50) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 32 · Nozzle size: 34 · Nozzle size: 36 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Drive: Slot
EUR 25.70
swiing® ingenious 16 mm intake manifold | Cilo 502
Manufacturer: swiing® ingenious parts · Mounting type: Screws · Number of fixing points: 2 pcs · Material: Aluminum · Surface: anodized · Color: black-matt · Ø inside: 16 mm · Ø External connection: 19 mm · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 60.20
Dell'Orto 12/12 SHA carburetor | Piaggio Ciao PX, C24
Nominal diameter: 12 mm · Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 60 mm · Choke control: Hand choke · Carburetor type: SHA (Piaggio) · Height: 109 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Total length: 55 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 51 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning
EUR 79.90
Not in stock
swiing® revival nozzle set M5 (50 - 60) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Drive: Slot
EUR 28.20
Moped fans also bought
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.20
Not in stock
Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Drive: Slot
EUR 25.70
Hot
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Color: black · Filter type: Foam · Width: 95 mm · Total length: 31.2 mm · Ø outside: 53.2 mm · Height: 88.7 mm · Mounting type: Plug connection clamped · Ø Internal connection: 51 mm · Area of application: Tuning
EUR 24.50
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Camouflaged: No · Material: Plastic · Color: black · Filter type: Foam · Width: 98 mm · Total length: 29 mm · Ø outside: 53 mm · Height: 94.7 mm · Mounting type: Plug connection clamped · Ø Internal connection: 50.6 mm · Area of application: Tuning
EUR 18.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
