Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Material | Plastic |
| Color | gray |
| Total length | 320 mm |
| Width | 58 mm |
| Height | 22 mm |
| Number of fixing points | 2 pcs |
| Ø mounting hole | 5.3 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.80
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Color: Chrome · Color: silver · Total length: 48 mm · Total length: 63 mm
EUR 18.30
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 2.6 mm · Ø outside: 4 mm · Total length: 12 mm · Width: 3.3 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.45
Not so nice 
15 mm intake manifold | Puch E50
Camouflaged: Yes · Material: Aluminum · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Total length: 47 mm · Area of application: Tuning
EUR 14.60
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Width: 125 mm · Height: 55 mm · Area of application: Standard
EUR 40.40
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Color: black · Material: Steel · Number of teeth: 45 pcs · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Ø inside: 94 mm · Cranking (offset): 8 mm · Hole spacing 2: 68 mm · Number of fixing points: 6 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm
EUR 24.40
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Test mark: none · Tension: 6 V · Ø Receptacle: 4 mm · Material: Plastic · Color: black · Color: red · Bulb holder: BA15s · Width: 60 mm · Depth: 80 mm · Height: 110 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 44.80
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Screw head: Hexagon · Shank: No · Width across flats SW: 10 mm · Strength class: 8.8 · Number of components: 24 pcs · Thread type: M6x1 (standard thread) · Thread length: 22 mm
EUR 9.70
Collection only possible with online purchase and appointment.
