Complete brake anchor plate from the manufacturer Grimeca, including brake pads, suitable for the front brake of Peugeot 103 SP and MVL rims.
With a little skill, the brake plate can also be adapted for Puch bikes. To do this, the collar of the anchor plate and the mounting of the locking cam of the fork must be milled off a little.
Ø outside brake shoes: 90 mm
Width brake shoes: 20 mm
Ø Bore for wheel axle: 12.2 mm
Ø outer brake plate: 110 mm
Height collar (from outer side of plate): 10 mm
Height mounting locking cam: 10 mm
Further accessories such as brake shoes or other brake anchor plates can be found in the accessories section.
| Ø bore | 12.2 mm |
| Material | Aluminum |
| Surface | sandblasted |
| Ø outside | 110 mm |
| Ø External brake pads | 90 mm |
| Ø axle | 12 mm |
| Puch |
| Peugeot |
Ratings
Accessories & related products
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Width across flats: 7 mm · Thread length: 7 mm · Area of application: Standard
EUR 3.05
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Width across flats SW: 19 mm · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Height: 5.9 mm · Height: 9.9 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Thread length: 40.5 mm · Thread length: 50 mm
EUR 47.80
Moped fans also bought
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Material: Aluminum · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Ø inside: 14.5 mm · Number of fixing points: 2 pcs · Total height: 54 mm · Height flange center hole: 43 mm · Total length: 47 mm · Camouflaged: Yes
EUR 14.60
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [inch]: 2.25 - 2.5 " · Tire width [inch]: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Valve type: TR4 Auto valve · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 12.20
Exhaust cigar 28 mm chrome | Puch Maxi S, N / X30 NS, NL
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 70 mm · Total length: 920 mm · Ø Internal connection: 28 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 49.00
IMCA shock absorber 30 cm black
Manufacturer: IMCA · Material: Steel · Surface: varnished · Damping type: Spring · Color: black · Adjustable: Yes · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Hole spacing: 300 mm · Ø spars: 28 mm · Ø outside: 45 mm · Number of fixing points: 2 pcs
EUR 62.60
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Manufacturer: Made in Portugal · Material: Steel · Adjustable: Yes · Color: black · Surface: powder-coated · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp · Total length: 340 mm · Number of fixing points: 2 pcs
EUR 24.50
Collection only possible with online purchase and appointment.
