Sealing ring for float cap on SRA carburetor.
Inner diameter: 40 mm
Outer diameter: 44 mm
Thickness: 2 mm
Fitted to Puch Velux X30 mopeds, carburetor version with needle (1/11/31).
Original Puch spare part number: 320.1.15.028.1
Original BING spare part manufactured in Germany in original equipment quality.
| Ø inside | 40 mm |
| Ø outside | 44 mm |
| Manufacturer | BING |
| Thickness | 2 mm |
| Puch |
| Zündapp Belmondo |
Moped fans also bought
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 2.6 mm · Width: 3.3 mm · Ø outside: 4 mm · Total length: 12 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.50
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Cable length: 2200 mm
EUR 2.95
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Ø outside: 45 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
BING O-ring Bing SRE & 85, Ø 20 mm
Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Number of components: 1 pcs · Material: Rubber · Area of application: Standard · Color: black · Surface: raw · Place of use: Carburetor · Cord thickness: 1.4 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
Karcoma fuel tap M16x1 vertical (with union nut) plastic connection | Puch X30 Velux
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF16x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Mounting type: Union nut · Spare tube shape: straight · Reserve level: 50 mm
EUR 36.80
GPO gasket set carburetor Bing SRE
Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 6.00
EUR 5.05
Working late? Evening hours on Thursday until 20:00
