Breaker without cable for various mopeds and small motorcycles with Bosch / Ducati ignitions.
This breaker can be installed on Puch Maxi S, Maxi N, Supermaxi LG1 / LG2, X30 Sport, X30 Velux, Sachs 50/2, 502, 503, Zündapp Belmondo mopeds, among others. It also fits various other models such as Tomos ST50 and Sport, Kreidler RS and GT as well as Hercules K50, SB1 and SB5 as well as Batavus T49 S, DKW RT 159 and Sachs Famo 50 engines.
This breaker has a reinforced spring and larger contact base. It was specially developed for engines with high engine speeds.
Ø axle: 4 mm
Ø mounting hole: 4.5 mm
Ø inside flywheel: 90 mm
Note: It is essential to apply a little breaker grease to the contact strip to minimize wear.
German quality product from the manufacturer BERU in original equipment quality.
Original BOSCH spare part number: 1 217 013 020
Original BERU spare part number: 0 340 100 466
| Manufacturer | BERU |
| Material | Steel |
| Ø Internal flywheel | 90 mm |
| Cable available | No |
| Ø axle | 4 mm |
| Area of application | Tuning |
| Number of fixing points | 1 pcs |
| Ø mounting hole | 4.5 mm |
| BOSCH OEM number | 1 217 013 020 |
| BERU OEM number | 0 340 100 466 |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Ratings
Accessories & related products
BERU breaker without cable | Bosch / Ducati
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BERU · Cable available: No · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 021 · BOSCH OEM number: 1 217 013 022 · BOSCH OEM number: 1 217 013 015 · BERU OEM number: 0 340 100 465
EUR 18.50
BERU breaker without axle | Bosch ignition
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BERU · Cable available: No · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A4606 · Sachs OEM no.: 0983 106 000 · BOSCH OEM number: 1 217 013 015 · BERU OEM number: 0 340 100 436
EUR 24.70
Hot 
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 23 mm · Total height: 32 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
EUR 12.30
BOSCH Breaker without cable reinforced | Bosch / Ducati
Ø mounting hole: 4.5 mm · Manufacturer: BOSCH · Ø Internal flywheel: 90 mm · Material: Steel · Cable available: No · Ø axle: 4 mm · Number of fixing points: 1 pcs · Area of application: Tuning · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 020 · BERU OEM number: 0 340 100 466
EUR 25.90
swiing® revival ignition set 90 mm breaker clockwise 6V
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Standard · Mounting type: Screws · Direction of rotation: right · Ø mounting plate: 90 mm · Tension: 6 V · Performance: 17 W · Number of fixing points: 4 pcs
EUR 247.70
swiing® revival ignition set 90 mm breaker left-turning 6V
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
EUR 247.70
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 15.50
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 12.30
EUR 27.33/l
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Mounting type: Screws · Type of current: Alternating current (AC) · Total length: 50 mm · Ø mounting hole: 6 mm · Tension: 6 V · Performance: 50 W · Height: 15 mm · Width: 27 mm
EUR 37.10
Hot
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 23 mm · Total height: 32 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
EUR 12.30
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "Original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Standard · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 130.00
Collection only possible with online purchase and appointment.
