Not so nice 
Wheel bearing cone with M12 x 1 mm thread for front wheel and rear wheel on your moped, moped or small motorcycle.
Wrench width: 16.9 mm
Height: 14.5 mm
Ø outer: 20 mm
The track is suitable for 3/16" (Ø 4.78 mm), 7/32" (Ø 5.56 mm), 1/4" (Ø 6.35 mm) balls, but the pitch must be observed.
Corresponding bearing balls, wheel axles, wheel nuts and other attachments can be found in the accessories section.
Price per piece
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
These cones have a soft surface and are therefore not suitable for professional use.
High-quality alternatives can be found in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF12x1 (fine pitch thread) |
| Height | 14.5 mm |
| Ø outside | 20 mm |
| Ø ball [inch] / [mm] | 3/16" (4.78 mm), 7/32" (5.56 mm), 1/4" (6.35 mm) |
| Width across flats | 16.9 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 5.8 mm SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut 0.5D · Height: 5.8 mm · Strength class: 8 · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Width across flats: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.20
swiing® revival wheel axle M12x1 x 165 ball bearing galvanized version
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Shank length: 75 mm · Thread length: 40 mm · Thread length: 50 mm
EUR 15.90
Explore categories from Hub & axle
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
swiing® revival seal Float SRE, SRC, SRF, SRA
Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Cable length: 2000 mm · Number of components: 1 pcs · Nipple length: 5.5 mm
EUR 4.20
Nut M12x1 x 5.8 mm SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut 0.5D · Height: 5.8 mm · Strength class: 8 · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Width across flats: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
