Gasket set from Athena suitable for your Kreidler moped, moped and small motorcycle with 50 cc 4-speed engine.
The gasket set contains the following flat gaskets:
- 1 pc. Center gasket 0.3 mm (paper)
- 1 pc. Gearbox cover gasket 0.3 mm (paper)
- 1 pc. Cylinder base gasket 0.3 mm, 44 x 44 mm (paper)
- 1 pc. Cylinder head gasket 0.15 mm, 44 x 44 mm (aluminum)
- 1 pc. Inlet gasket 1 mm, hole spacing 42 mm (paper)
You can find more gaskets and sealants in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
| Thickness | 0.3 mm, 0.15 mm, 1 mm |
| Manufacturer | Athena |
| Material | Sealing paper, Aluminum |
| Number of components | 5 pcs |
Suitable for the following models
| Kreidler |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm
EUR 24.40
EUR 348.57/l
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Temperature resistance (min.): -60 - 300 °C · Area of application: Chemistry · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Color: red · Gap dimension (max.): 2 mm
EUR 28.10
Not in stock
EUR 401.43/l
Moped fans like you also bought:
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank)
EUR 11.60
Clamping screw with slotted chain guard black | Pony GTX, Cilo, KTM
Number of components: 1 pcs · Manufacturer: Pony · Material: Hard plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Surface: raw · Color: silver · Area of application: Standard · Drive: External hexagon · Thread type: Sheet metal screw · Drive: Slot · Thread length: 18 mm · Total length: 29.5 mm · Ø External head: 19 mm
EUR 2.95
OMG fuel tap vertical M16x1 labeled (with union nut) pointing downwards
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Thread type: MF16x1 (fine pitch thread) · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Reserve level: 50 mm · Mounting type: Union nut
EUR 20.80
BING 68° carburetor pipe bend M6x0.75 SRA / SSE NOS
Material: Aluminum · Manufacturer: BING · Material: Brass · Surface: nickel-plated · Total length: 23.5 mm · Height: 28 mm · Component group Carburetor: Adjusting screws, float, etc. · Angle: 68 ° · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SSE · Ø outside: 6 mm · Ø outside: 11.95 mm · Ø outside: 14.35 mm · Internal thread: M5x0.8 (standard thread)
EUR 27.40
Collection only possible with online purchase and appointment.
