Gasket set for original 38 mm cylinders which were installed on the engine of your Puch Maxi P & K moped / moped.
The gasket set contains the following gaskets:
- 1 pc. Cylinder base gasket 1.25 mm (paper)
- 1 pc. 38 - 40 mm cylinder head gasket 0.4 mm (aluminum)
- 1 pc. Exhaust gasket hole spacing 42 mm, Ø 20 mm
- 1 pc. Flame tube gasket 2-piece Ø 26/34 mm
- 2 pcs. Inlet gasket hole spacing 38 mm, 0.7 mm
Quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Material | Aluminum, Sealing paper, Sealing carton |
| Ø cylinder | 38 mm, 40 mm |
| Number of components | 6 pcs |
| Thickness | 1.25 mm, 0.4 mm, 0.7 mm |
| Puch |
Accessories & related products
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
EUR 12.20
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Number of components: 4 pcs · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 8.00
EUR 9.10
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Color: red · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 28.20
EUR 402.86/l
swiing® revival gasket set cylinder | Puch Supermaxi LG1, LG2 (Cat)
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 - 44 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: No · Area of application: Standard
EUR 13.40
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Color: silver · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Width across flats SW: 7 mm · Thread length: 7 mm · Thread type: M6x1 (standard thread) · Area of application: Standard
EUR 3.05
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Ø outside: 93 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
EUR 61.40
Not in stock
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard
EUR 3.45
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
swiing® revival seal Float SRE, SRC, SRF, SRA
Material: Sealing paper · Surface: blank · Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Ø inside: 41 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
EUR 2.45
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Sealing, revising · Material: Sealing paper · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 6.00
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Ø inside: 3 mm · Color: transparent · Color: white · Ø outside: 20 mm · Filter type: Plastic net · Total length: 23.4 mm · Total length: 50 mm · demountable: No · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 7.15
Inner cable set automatic | Puch E50
Material: Steel · Manufacturer: Made in Germany · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.20
Collection only possible with online purchase and appointment.
