High-quality clutch spring set for various 3-jaw tuning clutches suitable for your Puch Maxi S / N, Puch Supermaxi LG1 mopeds / mopeds which have an E50 input engine with roller clutch installed.
The reinforced springs with a spring force of 500 N/mm increase the clutch engagement speed and thus ensure better starting behavior on inclines.
The set contains 3 pieces of springs to equip a complete clutch.
You can find complete clutches, aramid linings or other spring bars in the accessories section.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
Manufacturer: ASP · Material: Spring steel · Area of application: Tuning, Racing · Spring design: Pressure spring · Spring rate: 50 N/mm · Ø wire: 1.8 mm · Ø inside: 4.6 mm · Ø outside: 8.2 mm · Total length: 27 mm · Number of components: 1 pcs
| Spring design | Pressure spring |
| Spring rate | 50 N/mm |
| Ø wire | 1.8 mm |
| Manufacturer | ASP |
| Material | Spring steel |
| Total length | 27 mm |
| Ø inside | 4.6 mm |
| Ø outside | 8.2 mm |
| Number of components | 3 pcs |
| Area of application | Tuning, Racing |
| Puch | E50 |
Accessories & related products
swiing clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing · Material: Spring steel · Color: red · Area of application: Tuning · Total length: 26.6 mm · Surface: coated · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Number of components: 3 pcs
EUR 22.00
swiing clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing · Material: Spring steel · Color: yellow · Area of application: Tuning · Ø outside: 8.45 mm · Ø inside: 4.3 mm · Total length: 26.9 mm · Surface: coated · Number of components: 3 pcs
EUR 22.00
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (known as Kevlar®) · Number of springs: 6 pcs · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 21.5 mm · Ø outside: 91.5 mm
EUR 294.10
Not in stock
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Ø outside: 5 mm
EUR 2.45
Magura cable clamp Ø 6 x 9
Manufacturer: Magura · Area of application: Standard · Material: Chrome steel (known as Nirosta®) · Material: Steel · Thread type: M4x0.7 (standard thread) · Surface: blank · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 9 mm · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread length: 5 mm · Ø outside: 6 mm · Width across flats SW: 6 mm
EUR 2.45
Collection only possible with online purchase and appointment.
