Black cylinder head cover in the 43.5 mm version, compatible with your Puch Maxi S / N, Supermaxi LG1 / LG2, as well as your X30 Sport NS / NL moped with an E50 / ZA50 (air-cooled) / ZA50 (catalytic converter) or Z50 engine.
The black combustion chamber cover is perfectly suited for the AKOA 42 mm cylinder as well as for other 60–64 cc cylinders, e.g., the GPO Metrakit replica 43.5 mm. The original design is harmoniously echoed by the cast-in Puch stamp on the underside.
It is important to note that there is no decompression hole.
You can find the matching cylinder head gasket, installation hardware, and our recommended spark plugs in the accessories section.
A brand-name product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Aluminum |
| Surface | varnished |
| Width | 123.2 mm |
| Height | 54.5 mm |
| Area of application | Tuning |
| Camouflaged | No |
| Ø cylinder | 43.5 mm |
| Total length | 132.2 mm |
| Number of fixing points | 4 pcs |
| Candle thread | short |
| Decompressor | No |
| Hole pattern [mm] | 44 x 44 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® revival Stud Bolt Set M6x106 | Puch
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Diameter: 5.9 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.10
GPO gasket set cylinder 45 mm Puch
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Area of application: Tuning · Number of components: 4 pcs · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 9.75
Not in stock
Normio Lock Washer M6 6.2/14/1.4, Galvanized
Nominal diameter inside: 6 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Ø inside: 6.2 mm · Nominal diameter (thread): 6 mm · Thickness: 1.4 mm · Ø outside: 14 mm · Thread size: M6 · Pony OEM number: A1542 · Alternative version of the Pony OEM number: A1644 · Sachs OEM no.: 0244 021 000 · Alternative version of the Sachs OEM number: 0245 023 002
EUR 0.85
AKOA 42 mm cylinder kit black CH12 | Puch E50 / Z50 / ZA50
Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Ø piston pin (B): 12 mm · Ø cylinder neck: 47.9 mm · Ø Outlet outside: 19.9 mm · Number of fixing points: 4 pcs · Inlet window: 22.5 x 14.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 175.90
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Total length: 66 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle size: 62 · Ø Inside entrance: 15 mm · Width: 50 mm · Height: 95 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 98.30
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 46 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 43.00
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 129.10
Hot
GPO 43.5 mm Cylinder (Metrakit Replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 64 ccm · Nominal diameter: 43.5 mm · Ø cylinder neck: 47.8 mm · Number of fixing points: 4 pcs · Hole spacing for cylinder mounting: 44 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Area of application: Racing · Area of application: Tuning
EUR 116.80
AKOA 42 mm cylinder kit black CH12 | Puch E50 / Z50 / ZA50
Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Ø piston pin (B): 12 mm · Ø cylinder neck: 47.9 mm · Ø Outlet outside: 19.9 mm · Number of fixing points: 4 pcs · Inlet window: 22.5 x 14.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 175.90
Working late? Evening hours on Thursday until 20:00
