38 mm tuning cylinder in the "Power Edition" version made of aluminum, including a cylinder head with a 50 ccm displacement, suitable for mopeds equipped with Sachs 503 2AL, AAL, 2BL, or ABL CH engines.
The tuning kit, made of cast aluminum with a nickel-silicon carbide coating (commonly known as Nikasil), offers a significant performance boost across the entire RPM range, with an emphasis on low RPMs and high torque. Compared to the original cylinder, the sealing has been removed from this tuning cylinder and the intake port has been enlarged. The overflow channels as well as the exhaust and intake ports have been adjusted to optimize valve timing. In addition, the exhaust port has been designed at a more aerodynamic angle. All cylinder head covers can still be installed.
The internal geometry of the matching cylinder head has been adapted to the piston to ensure an optimal combustion process.
Please select from the drop-down menu whether you want a cylinder head with or without a decompressor.
The package includes the cylinder with the corresponding head, piston, piston rings, clips, bolts, studs, and the necessary gaskets for the cylinder base, intake, and cylinder head.
When you purchase this complete set, you’ll receive a substantial discount on the retail price of the individual parts.
Note: For Sachs 503 ABL engines, the engine block may need to be slightly ground down in the area of the cylinder neck. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find additional versions of the tuning kit as well as alternative racing cylinders in the accessories section.
Brand-name product from the manufacturer AKOA.
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 98.30
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 221.40
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 32 mm · Total length: 50 mm · Number of fixing points: 2 pcs · Alternative version of the Pony OEM number: A2177
EUR 61.40
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Material: Steel · Thread type: M10x1.5 (standard thread) · Thread length: 14 mm · Ø outside: 14 mm · Total length: 21.5 mm · Width across flats: 14 mm · Area of application: Standard · Sachs OEM no.: 0291 013 300
EUR 61.40
Not in stock
AKOA 40 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 40 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 258.30
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 258.30
AKOA 43 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 332.20
Explore categories from Cylinder
Moped fans also bought
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 40 mm · Width: 10 mm · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 30.60
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 98.30
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Area of application: Tuning · Color: black · Filter type: Racing screen · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Total length: 165 mm · Width: 68 mm · Height: 52 mm · Camouflaged: No
EUR 73.70
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Thickness: 3.3 mm · Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Area of application: Standard · Ø inside: 29.7 mm · Ø inside: 36 mm · Recording type: Interlocking · Number of slats: 2 pcs · Ø outside: 93.7 mm · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 32.60
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Ø outside: 84 mm · Candle thread: short · Height: 29 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5 · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 73.70
AKOA 38 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Area of application: Tuning · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No
EUR 221.40
Working late? Evening hours on Thursday until 20:00
