46 mm racing cylinder from Airsal suitable for Puch Maxi S & N, X30 Sport.
The racing kit has a straight exhaust, which is why standard exhausts for Puch mopeds can be fitted.
This is the largest possible racing kit that can be fitted without having to remove the engine housing.
| Material | Aluminum |
| Number of fixing points | 4 pcs |
| Manufacturer | Airsal |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | sandblasted |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 46 mm |
| Hole spacing inlet | 38 mm |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Airsal piston 46 mm | Puch
Manufacturer: Airsal · Nominal diameter: 46 mm · Ø outside piston (A): 45.95 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 98 g
EUR 46.50
Airsal cylinder head 46 / 47 mm | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: sandblasted · Ø cylinder: 46 - 47 mm · Total length: 180 mm · Width: 165 mm · Ø screw holder: 7.2 mm · Height: 60 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 64.90
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Ø outside: 15 mm · Ø inside: 12 mm · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.60
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: PHBG CS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Color: black · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Width: 70 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Height: 124 mm · Total length: 82 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 147.00
Airsal intake manifold 46 / 47 mm cylinder | Puch
Total height: 75 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Ø inside: 19 mm · Ø External connection: 24 mm · Total length: 60 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Height flange center hole: 65 mm · Mounting type: Screws · Camouflaged: No
EUR 48.90
Collection only possible with online purchase and appointment.
