Adjusting screw M5x0.75 elbow carburetor | Pony Beta

Dell'Orto reducing bush SHA 12mm (16/18 mm)

Ø inside: 16 mm · Ø outside: 18 mm · Total length: 14 mm · Manufacturer: Dell'Orto · Material: Plastic · Component group Carburetor: Adjusting screws, float, etc. · Color: white · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Ø Passage: 12 mm · Piaggio OEM number: 114482

Dell'Orto gasket set SHA | Piaggio Ciao, SI, Bravo, Boxer, Pony Beta 521

Manufacturer: Dell'Orto · Component group Carburetor: Sealing, revising · Carburetor type: SHA (Piaggio)

90° carburetor pipe bend M6x0.75 Dell'Orto SHA original | Piaggio Ciao

Ø outside: 6 mm · Total length: 27.5 mm · Manufacturer: Piaggio · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Height: 30 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread)

Adjusting screw for pipe bend Dell'Orto SHA carburetor NOS | Piaggio Ciao

Slotted: No · Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Thread type: MF5x0.75 (fine pitch thread)

Dell'Orto fuel connector straight SHA 7 - 13 mm

Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Drive: External hexagon · Carburetor type: SHA (Piaggio) · Filter type: Plastic net · Mounting type: Screws

M5 lock nut adjusting screw for elbow Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo

Manufacturer: Piaggio · Drive: External hexagon · Nut type: Hexagon nut · Height: 3 mm · Thread type: M5x0.8 (standard thread) · Width across flats: 7 mm

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm

Ø outside: 5 mm · Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 1650 mm · Area of application: Standard

Dell'Orto air filter screen SHA

Ø outside: 56 mm · Manufacturer: Dell'Orto · Material: Steel · Surface: galvanized (blue) · Color: silver · Height: 13 mm · Area of application: Standard

Dell'Orto 90° carburetor pipe bend set M6x0.75

Ø outside: 6 mm · Total length: 43 mm · Total length: 52 mm · Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Height: 27 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread)

Set screw M6x20 hexagon

Slotted: No · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Total length: 27 mm · Thread type: M6x1 (standard thread) · Thread length: 20 mm

Adjusting screw for pipe bend Dell'Orto SHA carburetor NOS | Piaggio Ciao

Slotted: No · Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Thread type: MF5x0.75 (fine pitch thread)

Dell'Orto 13/11 SHA Spaco carburetor hand choke

Total length: 52 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA (Piaggio) · Nominal diameter: 11 mm · Nominal diameter: 13 mm · Choke control: Hand choke · Width: 65 mm · Height: 99 mm · Camouflaged: No · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 11 mm · Ø Output inside: 13 mm · Ø Air filter connection: 59 mm · Area of application: Original · Area of application: Tuning · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 48 · Mounting type: Plug connection clamped

M5 lock nut adjusting screw for elbow Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo

Manufacturer: Piaggio · Drive: External hexagon · Nut type: Hexagon nut · Height: 3 mm · Thread type: M5x0.8 (standard thread) · Width across flats: 7 mm