ADDY clutch disk (inner plate) suitable for your manual moped / moped with Sachs 503 2AL / 2BL engine.
The clutch plate is suitable for the ADDY 4-plate racing clutch. The clutch lining based on sintered material is the third of three stages and corresponds to the modern, uncompromising lining. Increased wear on the steel plates, but best transmission performance.
The clutch facings are manufactured in an environmentally friendly way and are made from environmentally friendly materials.
Facing thickness: 3.5 mm
Price per piece - you need 4 pieces for the clutch.
Alternative clutch linings and other attachments can be found under accessories.
Quality product of the brand ADDY by Schöb Engineering.
| Manufacturer | ADDY |
| Material | Composite materials |
| Area of application | Tuning |
| Ø inside | 63.5 mm, 68.5 mm |
| Ø outside | 94 mm |
| Recording type | Interlocking |
| Number of slats | 4 pcs |
| Thickness | 3.5 mm |
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 29.6 mm · Ø inside: 35.3 mm · Number of slats: 3 pcs · Thickness: 3.8 mm · Number of springs: 9 pcs · Ø outside: 110.5 mm · Area of application: Tuning
EUR 508.60
ADDY clutch plate (4-plate clutch) red cork-rubber (stage 2) | Sachs 503
Manufacturer: ADDY · Material: Cork · Material: Rubber · Recording type: Interlocking · Number of slats: 4 pcs · Thickness: 3.5 mm · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Ø outside: 94 mm · Area of application: Tuning
EUR 12.10
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Manufacturer: GPO · Width across flats (trigger): 27 mm · Clamping depth: 10 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8
EUR 12.10
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 12.10
EUR 26.89/l
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Cord thickness: 1.4 mm · Manufacturer: BING · Color: black · Material: Rubber · Area of application: Standard · Surface: raw · Ø inside: 17.2 mm · Number of components: 1 pcs · Ø outside: 20 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank · Ø inside: 15 mm · Bearing type: Shoulder bearing · Ø outside: 40 mm · Stock number: BO15 · Width: 10 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 30.50
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Manufacturer: GPO · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Total length: 57 mm · Width across flats Screw: 19 mm · Strength class: 8.8
EUR 24.40
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40
EUR 48.90
Collection only possible with online purchase and appointment.
