A clutch that grips

A good clutch makes all the difference: it ensures that the power of your engine is transmitted cleanly to the road - without jerking or slipping. Whether it's pads, springs or complete clutch kits: We have everything you need for crisp gear changes and reliable propulsion. So that your moped not only drives, but grips properly.

GPO 3-jaw clutch (Ultra Light Version) | Puch E50

For: Puch

29403

GPO 3-jaw clutch (Ultra Light Version) | Puch E50

Manufacturer: GPO · Material: Aluminum · Material: Steel · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 93.5 mm · Thickness: 21 mm

EUR 131.60

Set

swiing® revival clutch set reinforced | Puch Z50

For: Puch

24035

swiing® revival clutch set reinforced | Puch Z50

Manufacturer: swiing® revival parts · Ø inside: 51 mm · Ø outside: 70 mm · Ø outside: 75 mm · Number of slats: 2 pcs · Number of springs: 1 pcs · Thickness: 2.5 mm

EUR 139.00

GPO clutch 2nd gear automatic engine tuning | Puch

For: Puch

33504

GPO clutch 2nd gear automatic engine tuning | Puch

Manufacturer: GPO · Material: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Ø inside: 24.7 mm · Ø outside: 83.5 mm · Thickness: 12.3 mm · Area of application: Standard · Puch OEM number: 320.2.12.330.2

EUR 110.70

swiing® revival clutch plates (3 pcs.) | Puch Z50

For: Puch

35710

swiing® revival clutch plates (3 pcs.) | Puch Z50

Manufacturer: swiing® revival parts · Ø outside: 70 mm · Ø outside: 75 mm · Ø inside: 51 mm · Number of slats: 3 pcs · Thickness: 2.5 mm · Puch OEM number: 050.1224.2

EUR 45.40

swiing® ingenious reinforcement set clutch (+40%) | Sachs 503, 50/2 (502), 50/3, 50/4

For: Sachs

21002

swiing® ingenious reinforcement set clutch (+40%) | Sachs 503, 50/2 (502), 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Ø outside: 8.75 mm · Surface: coated · Ø inside: 5.6 mm · Number of springs: 9 pcs · Thickness: 1.4 mm

EUR 43.00

New

GPO clutch 56 mm | Piaggio, Ciao, SI, Bravo, Boxer

For: Piaggio

37469

GPO clutch 56 mm | Piaggio, Ciao, SI, Bravo, Boxer

Manufacturer: GPO · Material: Steel · Ø Outer pulley: 56 mm · Area of application: Standard · Ø outside: 90 mm · Number of jaws: 3 pcs · Number of springs: 2 pcs · Number of springs: 3 pcs · Ø inside: 82 mm · Piaggio OEM number: 1651505 · Piaggio OEM number: 4503595

EUR 110.70

swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)

For: Sachs

23304

swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)

Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Area of application: Standard · Recording type: Interlocking · Ø outside: 93.7 mm · Ø inside: 29.7 mm · Ø inside: 36 mm · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006

EUR 32.60

GPO clutch 2nd gear automatic engine tuning | Sachs 503 AC, ADV (A2744)

For: Sachs

33501

GPO clutch 2nd gear automatic engine tuning | Sachs 503 AC, ADV (A2744)

Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Recording type: Interlocking · Number of jaws: 3 pcs · Ø outside: 83.5 mm · Ø inside: 24.7 mm · Thickness: 12.3 mm · Pony OEM number: A2744

EUR 110.70

For: Puch

10017

GPO clutch plates (pair) | Puch X30

Manufacturer: GPO · Number of slats: 2 pcs · Area of application: Standard

EUR 18.30

GPO clutch plates 2 pcs. | Zündapp Belmondo

For: Zündapp Belmondo · Zündapp

16158

GPO clutch plates 2 pcs. | Zündapp Belmondo

Manufacturer: GPO · Area of application: Standard · Ø outside: 103.5 mm · Ø inside: 74.5 mm · Number of slats: 2 pcs · Thickness: 2.9 mm

EUR 30.70

From speed to driving force

A centrifugal clutch consists of:

Clutchbell - a drum that is firmly connected to the drive.
Centrifugal weights - they rotate with the crankshaft and carry the clutch linings.
Clutch pads - provide the necessary friction to transmit the power.
Tension springs - hold the centrifugal bodies inwards when idling.

At idle speed, the centrifugal weights remain inside due to the springs, the clutch linings do not touch the bell housing - the rear wheel stands still. If the engine speed increases, centrifugal forces act on the centrifugal weights. They press the linings outwards against the bell. Friction causes the bell to rotate and the engine power is transferred to the gearbox and on to the rear wheel.

The higher the engine speed, the more firmly the pads press against the bell until the full power is transmitted. If you reduce the throttle, the tension springs pull back the centrifugal weights and the clutch disengages automatically.

New

swiing® revival clutch basket old & new model | Cilo 502T

For: Cilo

35910

swiing® revival clutch basket old & new model | Cilo 502T

Manufacturer: swiing® revival parts · Material: Steel · Surface: Hardened · Height: 45 mm · Number of teeth: 60 pcs · Ø inside: 85 mm

EUR 369.30

New

swiing® revival clutch set Aramid (old model) | Cilo 502T

For: Cilo

36751

swiing® revival clutch set Aramid (old model) | Cilo 502T

Manufacturer: swiing® revival parts · Material: Aramid (known as Kevlar®) · Material: Steel · Number of slats: 4 pcs · Thickness: 1 mm · Thickness: 2.5 mm · Thickness: 4 mm

EUR 184.60

New

swiing® revival wheel axle set front wheel | Piaggio Grillo

For: Piaggio

36485

swiing® revival wheel axle set front wheel | Piaggio Grillo

Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Steel · Ø shaft: 11 mm · Shank length: 30 mm · Thread type: MF11x1 (fine pitch thread) · Surface: galvanized (blue) · Thread length: 65 mm · Total length: 160 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Piaggio OEM number: (10)2139 · Piaggio OEM number: 114411 · Piaggio OEM number: 114413 · Piaggio OEM number: 114415 · Piaggio OEM number: 121403(a) · Piaggio OEM number: 124829 · Piaggio OEM number: 135696 · Piaggio OEM number: 135697 · Piaggio OEM number: 136019(2) · Piaggio OEM number: 265021 · Piaggio OEM number: 265071

EUR 45.40

New

swiing® revival plain bearing clutch basket (old model) | Cilo 502T

For: Cilo

35902

swiing® revival plain bearing clutch basket (old model) | Cilo 502T

Manufacturer: swiing® revival parts · Material: special bearing bronze · Ø outside: 22 mm · Ø inside: 15 mm · Total height: 15.2 mm

EUR 24.50

New

Hinge saddle right & left | Tomos Sprint

For: Tomos

36921

Hinge saddle right & left | Tomos Sprint

Manufacturer: Tomos · Material: Steel · Thread size: M6 · Width: 28.5 mm · Height: 30 mm · Surface: galvanized (blue) · Number of fixing points: 3 pcs · Total length: 39.8 mm · Ø inside: 7.5 mm · Hole spacing: 9.5 mm · Material thickness: 2.7 mm · Tomos OEM number: 222249

EUR 15.90

New

Brake anchor plate V905 Ø 90 mm front | Sachs / Hercules Prima, Optima

For: Sachs · Hercules

37475

Brake anchor plate V905 Ø 90 mm front | Sachs / Hercules Prima, Optima

Material: Steel · Ø outside: 107 mm · Surface: galvanized (blue) · Ø axle: 11 mm · Ø drum: 90 mm · Wide cam holder: 10 mm · Brake lever length (lever length): 65 mm · Ø bore: 11.2 mm · Sachs OEM no.: F5110 · Sachs OEM no.: F5111 · Sachs OEM no.: F5114 · Hercules OEM number: 0877 235 100

EUR 67.60

New

Wheel bearing shell Ø 35 mm (1A quality)

Universal

37482

Wheel bearing shell Ø 35 mm (1A quality)

Manufacturer: Made in Germany · Material: Steel · Height: 15 mm · Ø outside: 35.25 mm · Ø Bundle: 40 mm · Ø inside: 31 mm · Ø bore: 13.9 mm

EUR 15.40

New

ProTaper handlebar protector "PROTAPER" 21 cm yellow / black

Universal

37741

ProTaper handlebar protector "PROTAPER" 21 cm yellow / black

Manufacturer: ProTaper · Material: Foam · Color: black · Color: yellow · Ø outside: 53 mm · Total length: 210 mm · Ø inside: 12 mm · Number of components: 1 pcs

EUR 30.70

New

ProTaper handlebar protector "PROTAPER" 21 cm green / black

Universal

37743

ProTaper handlebar protector "PROTAPER" 21 cm green / black

Manufacturer: ProTaper · Material: Foam · Color: black · Color: green · Ø outside: 53 mm · Total length: 210 mm · Ø inside: 12 mm · Number of components: 1 pcs

EUR 30.70

New

Scorpion full-face helmet "EXO-491" black-grey matt (S-XL)

Universal

38024

Scorpion full-face helmet "EXO-491" black-grey matt (S-XL)

Manufacturer: ScorpionEXO · Material: Composite materials · Surface: dull · Color: black-matt · Color: gray · Color: silver · Gender: Unisex · Size: L · Size: M · Size: S · Size: XL · Closure type: Buckle closure · Eyeglass strap: No · Test mark: ECE 22.06 · Weight: 1500 g · Permitted in road traffic: Yes

EUR 209.20

Our favorite manufacturers