1/2" x 5/16" chain, which has 144 links and is suitable for driving various mopeds, small motorcycles and motorcycles.
This roller chain was also used on small motorcycles such as the Kreidler Florett, Zündapp KS etc.
The chain lock with spring lock, also known as a clip lock, is included in the scope of delivery.
Pitch: 1/2x5/16 (428 wider than standard moped chains)
Finish: HS (heavy-duty finish with reinforced plates and enlarged link surfaces)
Length: 144 links
Color: gold
Since the drive chain must be shortened in any case, we recommend that you also order a chain breaker, as listed under accessories.
Branded product of the manufacturer «A Motorcycle Chain» (KMC).
| Chain type | 428H |
| Manufacturer | A-Chain |
| Material | Steel |
| Surface | varnished |
| Color | gold |
| Number of chain links | 144 pcs |
| Chain pitch | 1/2" x 5/16" |
| Rolling circumference | 1829 mm |
| Chain lock type | Spring lock |
Ratings
Accessories & related products
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple length: 5 mm · Number of components: 1 pcs
EUR 2.95
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Ø outside: 5 mm · Number of components: 2 pcs
EUR 2.45
GPO light switch with wiring harness base chrome version
Cable length: 970 mm · Manufacturer: GPO · Number of cables: 5 pcs · Material: Plastic · Housing material: Steel · Surface: chrome-plated · Color: Chrome · Substructure material: Steel · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Ø Handlebars: 22 mm · Number of positions: 3 pcs · Cable bifurcation to motor: 970 mm · Total length: 50 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Width: 30 mm · Height: 25 mm
EUR 20.90
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Height: 55 mm · Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Tuning · Decompressor: No
EUR 53.20
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Place of use: Exhaust · Thickness: 3 mm · Ø screw holder: 6.6 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 9.15
swiing® ingenious 44 mm cylinder kit CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Tuning · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Inlet window: 24 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Number of fixing points: 4 pcs
EUR 123.80
EUR 111.40
Not in stock
Collection only possible with online purchase and appointment.
