Highly polished stainless steel pads for attaching clamp bars to the fork plate of your moped, moped or small motorcycle.
These two adapters can be used to mount handlebars on various fork plates.
To do this, two mounting holes are drilled into the fork plate. The substructures are attached there using the enclosed M8 screws.
Now conventional handlebars for fork plate mounting with a diameter of 22 mm can be fitted.
Thread for clamping brackets: M7 x 1 mm
Thread spacing: 30 mm
Height: 17 mm
Scope of delivery as shown in figure 1. Figures 2 / 3 are for illustration purposes only.
You can find a selection of matching clamps in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Material | Chrome steel (known as Nirosta®) |
| Surface | polished |
| Color | Chrome |
| Hole spacing | 30 mm |
| Height | 17 mm |
| Number of fixing points | 2 pcs |
| Universal |
| Puch |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.80
EUR 2’680.00/l
66HEROES steerer tube nut M26x1 closed pointed fork plate chrome
Surface: chrome-plated · Manufacturer: 66HEROES · Material: Steel · Ø outside: 36.5 mm · Nut type: Pointed nut · Height: 53 mm · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Thread depth: 11 mm · Width across flats SW: 30 mm
EUR 25.60
66HEROES Clamping bridges aluminum black | Puch
Surface: anodized · Manufacturer: 66HEROES · Material: Aluminum · Width: 22 mm · Height: 26 mm · Color: black-matt · Total length: 49 mm · Ø mounting hole: 7.3 mm · Clamping diameter: 22 mm · Hole spacing: 30 mm · Number of fixing points: 2 pcs
EUR 35.40
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Ø outside: 5 mm · Total length: 6 mm · Number of components: 2 pcs
EUR 2.45
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M7x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 10.5 mm · Shank: No · Thread length: 34.6 mm · Total length: 41.6 mm · Width across flats SW: 5 mm · Strength class: 8.8 · Number of components: 1 pcs
EUR 3.55
swiing® revival front fender primed | Piaggio Ciao
Surface: primed · Manufacturer: swiing® revival parts · Material: Steel · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Color: black · Shape of the mudguard: partly round · Mounting type: Nuts & bolts · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Piaggio OEM number: 274184
EUR 40.30
Handlebar fork plate 15 cm cross black
Material: Steel · Surface: varnished · Color: black · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Height: 150 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Mounting type: Fork plate · Ø inside (C): 12.5 mm · Total length over ends: 230 mm · Width: 710 mm
EUR 30.50
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Area of application: Standard · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Height: 13.8 mm · Thread depth: 12 mm · Width across flats SW: 30 mm
EUR 12.10
Collection only possible with online purchase and appointment.
