Cylinder head gasket made of graphite suitable for your Puch moped, moped or small motorcycle with 70 cc cylinder.
Thanks to the graphite it contains, the cylinder cover gasket has exceptional temperature resistance. It also ensures reliable sealing even at low surface pressures.
| Material | Graphite / Graphite, Aluminum |
| Place of use | Cylinder head |
| Ø cylinder | 45 mm |
| Ø inside | 45.5 mm |
| Nominal diameter | 45 mm |
| Ø screw holder | 8.2 mm |
| Thickness | 0.5 mm |
| Hole pattern [mm] | 45.5 x 45.5 |
| Puch |
Ratings
Accessories & related products
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Number of components: 4 pcs · Decompressor: Yes
EUR 11.80
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Contents: 70 ml · Area of application: Chemistry · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
EUR 27.40
EUR 391.43/l
BAD ASS Lucifer BigBore cylinder kit Ø 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Material: Gray cast iron · Area of application: Tuning · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 49 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 298.80
Explore categories from Seals & gaskets
Moped fans also bought
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 2.85
EUR 2.50
- 12 %
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Number of components: 1 pcs
EUR 2.85
EUR 2.50
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.85
Karcoma fuel filter 24 mm plastic / paper
Manufacturer: Karcoma · Material: Paper · Material: Plastic · Color: transparent · Color: yellow · Ø outside: 24 mm · Ø inside: 4.7 mm · Filter type: Filter paper · demountable: No · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm · Total length: 35 mm · Total length: 60 mm
EUR 16.10
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm
EUR 8.85
Collection only possible with online purchase and appointment.
