Electronic ignition with alternator compatible with your Puch moped featuring a 2-, 3-, or 4-speed engine, as well as mopeds equipped with a Sachs 505/2, 535, 503 AB/AC/ADV, 506, and 50 (wind-cooled, 1.25 / 1.5 PS, DE) engines.
This magneto ignition system is designed for left-rotating engines. The system operates contactlessly and requires little maintenance, as it uses neither a distributor nor a capacitor. The integrated, fully electronic ignition ensures a stable spark and can significantly improve starting performance and combustion compared to an older distributor ignition system.
The lighting output is 12 V / 100 W DC. This makes the system suitable for brighter lighting as well as for powering the battery, turn signals, and a standard horn.
Scope of delivery:
• Rotor
•, pre-assembled stator unit
•, ignition coil with ignition cable
•, regulator/rectifier
•, blue cut-off cable
•, small parts
Notes:
The matching pole wheel puller (M27x1.25 / M12) is not included.
The charging system is designed for rechargeable 12 V lead-acid, AGM, or gel batteries. Detailed installation instructions are included.
The ignition system is only suitable for engines without forced-air cooling.
You can find the compatible pole puller, spark plug connectors, spark plugs, an ignition timing gauge, and an ignition timing adjustment tool among the accessories.
A quality product from the Czech manufacturer Vape.
Alternative to the original Puch part number: 349.1.50.000.0, 349.2.50.000.0
| Manufacturer | VAPE |
| Material | Metal, Plastic |
| Tension | 12 V |
| Light coil voltage | 12 V |
| Ø cable | 7 mm |
| Performance | 100 W |
| Direction of rotation | left |
| Ø mounting plate | 90 mm |
| Ø Internal flywheel | 87.3 mm |
| Ø Flywheel outside | 103.7 mm |
| Weight | 1650 g |
| Mounting type | Nuts & bolts |
| Number of fixing points | 7 pcs |
| Area of application | Road use, Tuning |
| Alternative version of the Puch OEM number | 349.1.50.000.0, 349.2.50.000.0 |
| Puch | ZA50 (air-cooled) Z50 (X30 Sport) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 503 - AB , AC , ADV 505 (with pedal shaft) - 1A (AT) , 2A (HG) , 2B (HG) 535 506 |
Accessories & related products
Buzzetti flywheel trigger combination M26x1.5 / M27x1.25
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: Buzzetti · Strength class: 8.8 · Material: Steel · Thread type: MF26x1.5 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Surface: galvanized (blue) · Area of application: (Dis)assembly tool
EUR 24.50
swiing® revival ignition plate 90 mm Bosch / DUCATI
Ø inside: 18.5 mm · Ø outside: 90 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Tension: 6 V · Number of cables: 3 pcs · Cable length: 450 mm · Cable length: 550 mm · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
EUR 135.30
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Tension: 12 V · Light coil voltage: 12 V · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Flywheel outside: 75 mm · Performance: 60 W · Ø Internal flywheel: 63.5 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 307.50
Working late? Evening hours on Thursday until 20:00
